Tacamo Full-Auto Vector "CQR Annihilator" (HPA Not Included)

Tacamo Full-Auto Vector "CQR Annihilator"
Refurbished - Used w/ Custom Finish

Tacamo Full-Auto Vector "CQR Annihilator"
Refurbished - Used w/ Custom Finish

✅ Included:

🧩 Main Body Assembly (Core & Internal Mechanicals):
• Custom Paintball Markers Finish
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($25.00)
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• Tippmann X7 Phenom Full-Auto Trigger Assembly/Frame
• Tippmann X7 Phenom Hall Effect Electronics ($105.00)
• Custom Paintball Markers™ 3D Printed ASA Vector Magwell ($60.00)
• Tippmann TipX/TCR 7 Round Magazine ($25.00)
• RAP4 Tactical Flip-Up Sights ($20.00)

🔫 Front Assembly (Handguard, barrel kits, etc):
• 5.5" Tacamo Keymod Handguard ($24.99)
• Added Metal Picatinny Rails (5.5" & Two 4.25") ($40.00)
• 9” A5/X7 BigShot Assault .684 Barrel w/ Muzzle Threads ($90.00)
• Lapco Noveske Sound Amplifier ($40.00)
• Custom Paintball Markers 3D Printed CQR Angled Grip ($25.00)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Air-Thru Kit ($19.95)
• Tacamo Hurricane/Tornado Internal Flexi ASA ($49.00)
• Custom Paintball Markers 3D Printed HPA Vector Stock ($40.00)

💰 Total parts value: $1,002.94
(Includes the $300 cost of a fully rebuilt Tippmann X7 Phenom core, which is no longer available new and now discontinued. Parts value reflects cost if purchased new. The actual marker price on eBay is inflated due to high selling fees—buying directly from www.CustomPaintballMarkers.com will always be cheaper.)

❌ Not Included:
• Original packaging
• Ammo / Paintballs
• CO2 / HPA tank

💸 Fees:
This listing is priced higher to account for eBay’s 14% selling fee on all paintball-related purchases, along with additional transaction and shipping costs.
You can get the same build for a lower price by purchasing directly from 👉 www.CustomPaintballMarkers.com
Buying direct avoids marketplace fees and helps support more custom work like this.

🛠️ About the Marker:
Item Appearance:
Marker is built using a lightly-used RAP4 Tacamo Hurricane body and new/like-new accessories.
The Vector stock was 3D printed with 25% ASA gyroid infill and is fully intact with no cracks or damage.
The Custom CQR Angled Grip has a small crack, but remains secure, firm, and combat-ready. It was printed using 50% ASA gyroid infill for durability.
The Vector magwell was printed with 50% ASA gyroid infill, while the mag latch and magwell grip adapter were printed at 100% infill to ensure strength.
All 3D printed components were made using ASA material for weather resistance and long-term field durability.
The flip-up sights are brand new and have never seen field play.
The tan parts have been custom painted in Flat Dark Earth (FDE) — some areas show wear from handling and use.
The Noveske sound amplifier has minor dings, but is fully functional.
The barrel has cosmetic marks from set screws, which do not affect performance.

Functionality:
This marker has been fully rebuilt and tested using ceramic .68 caliber rounds.
Electronics must be powered on to use full-auto mode, but semi-auto mode works without powering the electronics—a useful backup in any scenario.
⚠️ Note: A low battery can cause the electronic trigger to malfunction or fail to cycle correctly. Always use a fresh 9V battery for reliable performance.
All internal components have been tested and function properly.

Additional Notes:
The mag latch spring is intentionally strong to ensure your magazine stays firmly in place during use.
You may need to press the latch when loading a magazine into the chamber. This tight spring tension prevents mags from sliding out unintentionally and keeps them locked during play.

Parts/Accessories:
Everything listed above is included. Marker will be disassembled for shipping.
No additional accessories (magazines, tanks, loaders, etc.) are included unless otherwise stated.
Parts pricing shows the level of investment in this build.

🔍 Condition Description:
The internal valve has been fully rebuilt. All components are functional.
Light cosmetic wear may be visible on some parts due to previous use.
The crack in the CQR grip is cosmetic and does not affect usability.
Painted FDE parts show some wear, and barrel set screw marks are cosmetic only.

📏 Length & Weight:
Compact tactical build with short handguard and air-thru stock.
Length: Approximately 33"
Weight: TBD

🔫 Air & Chronograph:
This marker is optimized for High Pressure Air (HPA) and may experience freeze or performance issues with CO2, especially in cold weather or rapid fire.
Chronograph adjustment is required after reassembly to meet field velocity limits.

🎯 Paint Preference:
This marker is hard on fragile paint and may cause breaks with soft tournament-grade rounds.
Use Valken Graffiti or similar durable-shell paintballs for best results.

🛍️ More Products:
👉 www.CustomPaintballMarkers.com

📦 Shipping Disclaimer:
• This marker will be disassembled for secure and cost-effective shipping
• Disassembly helps avoid USPS inspection delays due to firearm-like appearance
• Need help reassembling? Message me—happy to help
• All parts will be packed in plastic, bubble wrap, and/or paper
• Ships via USPS Priority Mail or USPS Ground Advantage
• Ships within 3 business days of payment, unless otherwise noted
• All shipments include $100 USPS insurance minimum
• Weather or carrier delays may occur—please allow extra time if needed
• For damage or loss claims, retain the box and contact me for USPS claims support