RAP4 Tacamo Hurricane Full-Auto BREN IAR "300 Blackout Subsonic"

RAP4 Tacamo Hurricane BREN IAR "300 Blackout Subsonic"
Refurbished - Used

✅ Included:

🧩 Main Body Assembly (Main Body & Internal Mechanicals):
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• Tippmann X7 Phenom Full-Auto Trigger Assembly
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• RAP4 DMAG/ Helix Magwell
• RAP4 22Rnd Helix Magazines
• MBUS Flip-Up Iron Sights ($10.00)

🔫 Front Assembly (Handguard, barrel kits, foregrips, etc):
• 5.5" Tacamo Keymod Handguard ($24.99)
• Added Metal Picatinny Rails (Three 5.5") ($30.00)
• 15.5” CP .689 A5/X7 Barrel ($64.95)
• 8.75” Custom Paintball Markers Printed CRB Suppressor ($40.00)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Air-Thru Kit ($19.95)
• Tacamo Hurricane/Tornado Internal Flexi ASA ($49.00)
• Remote Line Stock ($39.95)
• Magpul CTR Carbine Stock (Factory FDE) ($64.95)
• Buttstock Anti-Recoil Pad ($14.95)

💰 Total parts value: $907.74
(Includes the $400 cost of a fully rebuilt Fully-Automatic Tippmann X7 Phenom, which is no longer available NEW and now discontinued. Parts value reflects cost if purchased NEW.)

❌ Not Included:
• Air tank
• Hopper / additional mags
• Paintballs

🛠️ About the Marker:

Appearance:
Finished in Custom Paintball Markers™ paint scheme. The main body and handguard were custom painted FDE, while the Magpul CTR stock is original factory FDE. Barrel has a small amount of sticky residue at the tip from electrical tape previously applied, though it is completely concealed by the suppressor once installed.

Functionality:
Tested and shooting at 285 FPS with Reballs. Fully functional and tuned.

Parts/Accessories:
• The suppressor is 3D printed using ASA material and has reinforced components.
• This marker has been custom built with an assortment of parts from MCSUS and many other retailers, making it a unique build with carefully sourced upgrades.

🔍 Condition Description:
This marker is refurbished-used, built with a combination of new and used parts. Fully rebuilt core with upgraded trigger assembly. Suppressor, magwell, and stock are in solid shape. Barrel shows light cosmetic residue, but performance is unaffected. Custom painted FDE body and handguard show normal finish wear consistent with use.

📏 Length & Weight:
• Overall length: TBD
• Weight: TBD

🔫 Air & Chronograph:
• Best performance with HPA (compressed air) only.
• Chronographed at 285 FPS using Reballs.
• CO₂ not recommended for Phenom Flex Valve markers because the CO₂ may freeze the internals, leading to malfunctions and potential damage.

🎯 Paint Preference:
This marker is harder on paint and is not recommended to be used with premium paint. For best results, use durable mid-grade paint such as Valken Graffiti or similarly harder shelled paintballs.

⚠️ 3D Printed Part Notes:
• The suppressor was printed with ASA at 75% gyroid infill. The two additional printed pieces are made at 100% infill and, together with a 1/2" 10-32 screw, are used to hold the suppressor firmly in place on the barrel.
• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break.
• Over-tightening screws can also create cracks—these parts are installed firmly but should be handled with care.
• 3D printed parts will hold up during regular play if treated with care. Dropping, slamming, or throwing the marker may cause cracks or breaks.
• If damaged, replacement magwells can be purchased separately but will not be replaced for free.

⚠️ Air Storage Warning:
These markers are not designed to stay aired up for long periods of time.
While it’s fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal o-rings and may eventually lead to leaks.
Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

📦 Shipping Disclaimer:
• This marker has been disassembled for secure and cost-effective shipping.
• This also prevents issues with USPS flagging the package due to firearm-like appearance.
• Need help putting it together? Message me—happy to help!
• All parts are wrapped in plastic, bubble wrap, and/or paper
• USPS may inspect packages that appear to contain firearm-like items
• Ships via USPS Priority Mail or USPS Ground Advantage
• Orders ship within 3 business days of payment, unless otherwise noted
• All shipments include $100 USPS insurance minimum
• Weather or other delays via USPS can occur—please allow extra time if needed
• For damage or loss claims, retain the box and contact me for USPS claims support.