Tacamo Full-Auto Vector "KingSlayer” (HPA Not Included)

Tacamo Full-Auto Vector “KingSlayer”
Refurbished - Used

✅ Included:

🧩 Main Body Assembly (Main Body & Internal Mechanicals):
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• Custom Paintball Markers Nameplate
• Tippmann X7 Phenom Full-Auto Trigger Assembly
• Tippmann X7 Phenom Hall Effect Electronics (Like-New)
• Custom Paintball Markers Carbon Fiber Vector Magwell (New) ($60.00)
• Tippmann TipX/TCR 12Round Magazine ($25.00)

🔫 Front Assembly (Handguard, barrel kits, foregrips, etc):
• 4” Vector 3D Printed ASA Handguard (NEW) ($40.00)
• 9.5” Stock A5/X7 Barrel ($29.95)
• 8.75” Custom Paintball Markers ASA CRB Suppressor ($40.00)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Flex-Air Pipe ($19.95)
• RAP4 Internal Flex Air ASA ($49.00)
• RAP4 Air-In-Stock Guide Rail ($14.95)
• RAP4 SCA Adjustable Tank Stock ($49.95)

❌ Not Included:
• Ammo / Paintballs
• CO2 / HPA

💰 Total parts value: $943.57
(Includes the $400.00 value of a fully rebuilt Fully-Automatic Tippmann X7 Phenom core, discontinued and no longer available new. Parts value reflects cost if purchased new.)

🔍 Condition Description:
Refurbished - Used. Rebuilt internals with confirmed full-auto functionality. Cosmetic wear present (minor scuffs/scratches on painted surfaces).

🛠️ About the Marker:
• Tested at 300FPS using reballs
• The stock A5/X7 barrel ends 2.5” before the end of the CRB Suppressor
• HPA not included
• All tan parts are painted with minor scuffs and scratches

Item Appearance:
Marker is built using a lightly used RAP4 Tacamo Hurricane body and new / like-new external accessories.
Custom 3D printed Vector magwell and short handguard paired with an extended suppressor and tank stock give it a sleek AR Vector profile.
There are small scratches on the magwell, CRB suppressor, and main body.

Functionality:
This marker has been tested with .68 caliber reballs and is in full working order.
The full-auto X7 electronics include a 3-shot safety and must be manually powered on for use.
The marker also operates in semi-auto mode without needing the electronics switched on.
The valve has been completely rebuilt, and all internals and fittings are functioning properly.

⚠️ 3D Printed Part Notes:
• The magwell was printed with Carbon Fiber and ASA — CF 20% / ASA 80%. Infill: 75% gyroid.
• CF mag latch and CF Magwell Grip Adapter printed at 100% infill.
• Handguard printed at 75% gyroid infill with ASA.
• CRB Suppressor printed at 75% infill with the barrel adapter printed at 100% infill.
• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break.
• Over-tightening screws can also create cracks—these parts are installed firmly but should be handled with care.
• 3D printed parts will hold up during regular play if you’re respectful with your marker. However, user error is not valid for refunds.
• If damaged, replacement parts may be purchased, but they will not be replaced for free.

🔫 Air & Chronograph:
This marker is optimized for High Pressure Air (HPA) and may freeze or experience performance issues when using CO2, especially in cold or rapid-fire conditions.
Chronograph adjustment will be required upon delivery to match your field’s FPS limits. Be sure to tune it properly after reassembly to ensure safe and legal operation on the field.

Chronograph: 300FPS using reballs
Air: HPA not included

🎯 Paint Preference:
This marker is hard on paint and may break premium paint in the chamber. For best performance, use Valken Graffiti or other paintballs with a thicker, more durable shell (durable 3 star or 2 star paint recommended).

⚠️ Air Storage Warning:
These markers are not designed to stay aired up for long periods of time.
While it’s fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal o-rings and may eventually lead to leaks.
Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

📦 Shipping Disclaimer:
• This marker has been disassembled for secure and cost-effective shipping.
• This also prevents issues with USPS flagging the package due to firearm-like appearance.
• Need help putting it together? Message me—happy to help!
• All parts are wrapped in plastic, bubble wrap, and/or paper.
• USPS may inspect packages that appear to contain firearm-like items.
• Ships via USPS Priority Mail or USPS Ground Advantage.
• Orders ship within 3 business days of payment, unless otherwise noted.
• All shipments include $100 USPS insurance minimum.
• Weather or other delays via USPS can occur—please allow extra time if needed.
• For damage or loss claims, retain the box and contact me for USPS claims support.