Tacamo Vector "CRB MOD"

Tacamo Vector SMG "Operator’s Cut"
Refurbished - Used

✅ Included:

🧩 Main Body Assembly (Core & Internal Mechanicals):
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• MBUS Flip-Up Sights ($30.00)
• Tippmann X7 Phenom Semi-Auto Trigger Frame
• Tippmann X7 Trigger Assembly
• Custom Paintball Markers™ 3D Printed ASA Vector Magwell ($60.00)
• TipX 7-Round Magazine ($25.00)

🔫 Front Assembly (Handguard, barrel kits, foregrips, etc):
• 3.75" Custom Paintball Markers 3D Printed Vector Handguard ($40.00)
• Added Metal Picatinny Rails (Two 2.25") ($10.00)
• VISM NCStar Mini Hand-Stop ($20.00)
• 10.5” A5/X7 Barrel (Used) ($29.95)
• 8.75” Custom Paintball Markers 3D Printed Vector CRB Suppressor ($40.00)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Flex-Air Pipe ($19.95)
• Tippmann X7 Commando Air-Thru Stock ($134.95)

💰 Total parts value: $858.85
(Includes the $300 cost of a fully rebuilt Semi-Automatic Tippmann X7 Phenom, which is no longer available NEW and now discontinued. Parts value reflects cost if purchased NEW.)

❌ Not Included:
• Original packaging
• Ammo / Paintballs
• CO2 / HPA tank

🛠️ About the Marker:

Item Appearance:
Marker is built using a lightly-used RAP4 Tacamo Hurricane MKP-II body and new/like-new external accessories. Custom 3D printed Vector magwell and short handguard paired with an extended suppressor give it a sleek SMG profile.

Functionality:
This marker has been tested with ceramic .68 caliber balls and is in full working order. The semi-auto trigger frame is newly purchased. Valve has been completely rebuilt. All internals and fittings are functioning properly.

Parts/Accessories:
Everything listed above is included. The marker will be disassembled for shipping. The semi-auto trigger frame was recently purchased new and is in excellent condition.

The included Vector magwell is 3D printed with ASA at 25% infill and the mag latch and grip adapter at 100% infill, offering a lightweight and functional fit for magfed play.
The right side of the magwell has a small crack (shown in photos). This does not affect stability or performance and is common with 3D printed parts over time.

The handguard and suppressor are printed using ASA at 75% Gryroid infill.

(3D printed parts will hold up during regular use if you're respectful with your marker. However, dropping, slamming, or throwing the marker may crack or break these parts. User error is not valid for refunds. If damaged, a replacement magwell may be purchased, but it will not be replaced for free.)

No additional accessories (such as extra magazines and/or parts, or tanks) are included unless otherwise noted.

Parts costs have been provided to show the total value and investment that has gone into building this marker.

📏 Length & Weight:
Marker length: ~32.5”
The 10.5” barrel ends 2.25” before the end of the CRB Suppressor.

🔍 Condition Description:
The internal valve has been fully rebuilt. All components are functional. Body and parts may show light cosmetic wear from prior use.

⚠️ 3D Printed Part Notes:
• The included Vector magwell is 3D printed with ASA at 25% infill, with the mag latch and grip adapter at 100%, offering a lightweight and functional fit for magfed play.
• The handguard and suppressor are printed with ASA at 75% gyroid infill; the stock is printed with ASA at 50% gyroid infill. The suppressor also has two additional printed parts made at 100% infill with ASA, which, together with a 1/2" 10-32 screw, hold the suppressor firmly in place on the barrel.
• The right side of the magwell towards the back screw has a visible crack (shown in photos). This does not affect stability or performance and is common with 3D printed parts over time.
• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break.
• Over-tightening screws can also create cracks—these parts are installed firmly but should be handled with care.
• 3D printed parts will hold up during regular play if you’re respectful with your marker. However, user error is not valid for refunds.
• If damaged, replacement magwells may be purchased, but they will not be replaced for free.

🔫 Air & Chronograph:
This marker is optimized for High Pressure Air (HPA) and may freeze or experience performance issues when using CO2, especially in cold or rapid-fire conditions.
Chronograph adjustment will be required upon delivery to match your field’s FPS limits.
Be sure to tune it properly after reassembly to ensure safe and legal operation on the field.

🎯 Paint Preference:
This marker is hard on paint and may break premium paint in the chamber.
For best performance, use Valken Graffiti or other paintballs with a thicker, more durable shell.

⚠️ Air Storage Warning:
These markers are not designed to stay aired up for long periods of time.
While it’s fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal o-rings and may eventually lead to leaks.
Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

📦 Shipping Disclaimer:
• This marker has been disassembled for secure and cost-effective shipping.
• This also prevents issues with USPS flagging the package due to firearm-like appearance.
• Need help putting it together? Message me—happy to help!
• All parts are wrapped in plastic, bubble wrap, and/or paper
• USPS may inspect packages that appear to contain firearm-like items
• Ships via USPS Priority Mail or USPS Ground Advantage
• Orders ship within 3 business days of payment, unless otherwise noted
• All shipments include $100 USPS insurance minimum
• Weather or other delays via USPS can occur—please allow extra time if needed
• For damage or loss claims, retain the box and contact me for USPS claims support.