Tacamo Vector “Imperial Assault”

Tacamo Vector “Imperial Assault”
Refurbished - Used

✅ Included:

🧩 Main Body Assembly (Main Body & Internal Mechanicals):
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• RAP4 Tacamo Hurricane Lok-Bolt Anti-Chop System ($40.00)
• Custom Paintball Markers Nameplate
• Tippmann Flip-Up Sights ($30.00)
• Tippmann X7 Phenom Semi-Auto Trigger Assembly
• Custom Paintball Markers Carbon Fiber Vector Magwell (New) ($60.00)
• Tippmann TipX/TCR 12Round Magazine ($25.00)

🔫 Front Assembly (Handguard, barrel kits, foregrips, etc):
• 3.75" Custom Paintball Markers 3D Printed Vector Handguard ($40.00)
• 9.5” Stock A5/X7 Barrel ($29.95)
• 8.75” Custom Paintball Markers ASA CRB Suppressor ($40.00)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Flex-Air Pipe ($19.95)
• RAP4 Internal Flex Air ASA ($49.00)
• Custom Paintball Markers™ 3D Printed HPA Vector Stock ($40.00)

Total Parts Value: $822.90
(Includes the $300.00 cost of a fully rebuilt Semi-Automatic Tippmann X7 Phenom, which is no longer available NEW and now discontinued. Parts value reflects cost if purchased NEW.)

❌ Not Included:
• HPA / Tank.
• Paint / Reballs used for testing.
• Original retail packaging (unless otherwise noted).

🔍 Condition Description:
Refurbished - Used. Overall cosmetic condition is very good with minor paint scuffs and small surface imperfections as noted below. Functionally the valve and internals have been fully rebuilt and inspected.

🛠️ About the Marker:
• Fully rebuilt Tippmann X7 Phenom Flex Valve — internals refreshed and inspected.
• HPA not included.
• All white parts are painted using Montana 94. There may be minor cracks and scuffs on the paint but overall the condition is very good.
• The front handguard where the barrel and suppressor screw on has smudged paint on the black bottom half — this is not visible with the current suppressor setup. The suppressor may have a white smudge from paint transfer.
• CRB Suppressor and barrel fit described in the Front Assembly section.

⚠️ 3D Printed Part Notes:
• The magwell was printed with Carbon Fiber + ASA (CF 20% / ASA 80%), 75% gyroid infill; CF mag latch and magwell grip adapter printed at 100% infill.
• Handguard printed in ASA at 75% gyroid infill.
• Stock printed CF + ASA (CF 20% / ASA 80%), 75% gyroid infill.
• CRB Suppressor printed at 75% infill with the barrel adapter at 100% infill.

• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break.
• Over-tightening screws can also create cracks — these parts are installed firmly but should be handled with care.
• 3D printed parts will hold up during regular play if you’re respectful with your marker. However, user error is not valid for refunds.
• If damaged, replacement magwells may be purchased, but they will not be replaced for free.

🔫 Air & Chronograph:
• Optimized for High Pressure Air (HPA).
• Tested at 285 FPS using Reball. Chronograph adjustment recommended after reassembly to match your field’s FPS limits.
• Be sure to tune properly after reassembly to ensure safe and legal operation on the field.

🎯 Paint Preference:
This marker is harder on paint and may break premium paint in the chamber. For best performance, use Valken Graffiti or other paintballs with a thicker, more durable shell. Durable 3 star or 2 star paint is recommended.

⚠️ Air Storage Warning:
These markers are not designed to stay aired up for long periods of time.
While it’s fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal o-rings and may eventually lead to leaks.
Several companies make on/off ASA adapters, which are strongly recommended for setups like this — I can provide links if requested.

📦 Shipping Disclaimer:
• This marker has been disassembled for secure and cost-effective shipping.
• This also prevents issues with USPS flagging the package due to firearm-like appearance.
• Need help putting it together? Message me—happy to help!
• All parts are wrapped in plastic, bubble wrap, and/or paper.
• USPS may inspect packages that appear to contain firearm-like items.
• Ships via USPS Priority Mail or USPS Ground Advantage.
• Orders ship within 3 business days of payment, unless otherwise noted.
• All shipments include $100 USPS insurance minimum.
• Weather or other delays via USPS can occur—please allow extra time if needed.
• For damage or loss claims, retain the box and contact me for USPS claims support.