Tacamo Vector “Task Force 141” (HPA Not Included)

Tacamo Vector “Task Force 141” (HPA Not Included)
Refurbished - Used

✅ Included:

🧩 Main Body Assembly (Main Body & Internal Mechanicals):
• Custom Paintball Markers™ Finish
• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• Tippmann Ball Latch (NEW)
• RAP4 Tacamo Hurricane Conversion Kit ($139.00)
• Mock 552 EOTech Holographic Sight (NEW) ($34.49)
• Tippmann X7 Phenom Semi-Auto Trigger Assembly/Frame
• Custom Paintball Markers™ 3D Printed ASA Vector Magwell ($60.00)
• Tippmann TipX/TCR 12 Round Magazine ($25.00)
• Unbranded FDE Flip-Up Sights ($10.00)

🔫 Front Assembly (Handguard, barrel kits, foregrips, etc):
• Tippmann X7 Phenom Flatline Barrel Handguard Assembly (NEW) ($64.95)
• (2) 3.5” FDE Picatinny Rail Covers (NEW) ($5.00)
• Vism 1913 FDE Handstop ($12.99)

🛡️ Rear Assembly (Stocks, Rear ASA, etc):
• Tacamo Hurricane Air-Thru Kit ($19.95)
• Tacamo Hurricane/Tornado Internal Flexi ASA ($49.00)
• Custom Paintball Markers™ 3D Printed HPA Vector Stock ($40.00)

💰 Total parts value: $770.38
(Includes the $400 cost of a fully rebuilt Fully-Automatic Tippmann X7 Phenom, which is no longer available NEW and now discontinued. Parts value reflects cost if purchased NEW.)

❌ Not Included:
• Original packaging
• Ammo / Paintballs
• CO2 / HPA tank
• Extra magazines

🛠️ About the Marker:

Item Appearance:
Custom-painted and rebuilt with aggressive styling. 3D printed magwell and stock designed to match the Vector aesthetic. The Flatline Barrel Handguard Assembly is NEW. The rail covers are NEW. The Vism handstop shows wear. The stock has a small scuff on top, scratched from storage. Painted FDE parts of this marker show wear.

Functionality:
Fully functional and tested with .68 caliber paintballs.
The Flatline Barrel Handguard Assembly is easy to maintain — remove the assembly and the Flatline barrel with its adapter can be pulled out for cleaning without disassembling the whole marker.

Parts/Accessories:
Everything listed above is included. The marker will be disassembled for shipping. No additional accessories (such as extra magazines) are included unless otherwise noted. Parts value reflects cost if purchased NEW.

🔍 Condition Description:
Fully rebuilt and functional with a custom finish. Minor wear from handling and storage. 3D printed parts are stable but require careful use.

📏 Length & Weight:
• 30.25" with 13ci HPA tank (not included) and 3D printed stock (included)
• 20" without tank/stock
• 6 lbs 5 oz as pictured with empty tank and no ammo

🔫 Air & Chronograph:
This marker should be used with HPA. CO2 may freeze the internal components, leading to malfunctions.
Chronograph tuning will be required to meet your local field’s FPS limits. Be sure to tune it properly after reassembly for safe and legal field use.

Tested with .68 caliber Reballs at 255 FPS. This marker should have higher FPS with an upgraded regulator output on the tank.

⚠️ Air Storage Warning:
These markers are not designed to stay aired up for long periods of time.
While it’s fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal o-rings and may eventually lead to leaks.
Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

🎯 Paint Preference:
This marker is harder on paint and is not recommended for use with premium or brittle paint. For best results, use durable mid-grade paint such as Valken Graffiti or other harder-shelled paintballs. The Flatline barrel may break 3-Star paint in the barrel; for the most consistent results, use 2-Star paint.

⚠️ 3D Printed Part Notes:
• The magwell and stock have been printed with ASA at 50% gyroid infill (mag latch and grip adapter at 100%).
• These are 3D printed parts and may be sensitive to heat. Do not throw or drop the marker, as these parts may crack.
• The right side of the magwell towards the back screw has a visible crack (shown in photos) that does not affect stability or performance and is common with 3D printed parts over time.
• Over-tightening screws may create cracks—these parts are installed firmly but should be treated carefully.
• If broken from misuse, replacement magwells are available but not free.

📸 Note:
The HPA tank in the photos is for display only and is not included.

📦 Shipping Disclaimer:
• This marker has been disassembled for secure and cost-effective shipping.
• This also prevents issues with USPS flagging the package due to firearm-like appearance.
• Need help putting it together? Message me—happy to help!
• All parts are wrapped in plastic, bubble wrap, and/or paper
• USPS may inspect packages that appear to contain firearm-like items
• Ships via USPS Priority Mail or USPS Ground Advantage
• Orders ship within 3 business days of payment, unless otherwise noted
• All shipments include $100 USPS insurance minimum
• Weather or other delays via USPS can occur—please allow extra time if needed
• For damage or loss claims, retain the box and contact me for USPS claims support.