Custom Paintball Markers Full-Auto Vector "Vandal" (HPA Not Included)

Custom Paintball Markers Full-Auto Vector "Vandal"
Refurbished–Used

(Testing Video)

Link Here 🔗

Included

Main Body Assembly (Main Body & Internal Mechanicals)

• Fully Rebuilt Tippmann X7 Phenom Flex Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• RAP4 Tacamo Hurricane Conversion Kit ($117.00)
• Mock Daniel Defense Iron Sights ($30.00)
• Custom Paintball Markers Nameplate
• Tippmann X7 Phenom Full-Auto Trigger Assembly
• Tippmann X7 Phenom Hall Effect Electronics
• Custom Paintball Markers 3D Printed ASA/Carbon Fiber Magwell (New) ($60.00)
• Tippmann TiPX/TCR 7-Round Magazine ($25.00)

Front Assembly (Handguard, Barrel Kits, Foregrips, etc.)

• 5" MCSUS X7 Keymod Handguard ($24.99)
• (2) 3.75" Side Metal Picatinny Rails ($20.00)
• 3" Underbarrel Metal Picatinny Rail ($5.00)
• 6.95" Killhouse Weapon Systems Lapco Barrel ($64.99)
• 1.75" Lapco Flash Hider Muzzle Brake

Rear Assembly (Stocks, Rear ASA, etc.)

• Tacamo Hurricane Flex-Air Pipe ($19.95)
• RAP4 Internal Flex Air ASA ($49.00)
• Custom Paintball Markers 3D Printed ASA/Carbon Fiber Tank Stock ($30.00)

Total Parts Value: $855.93

Parts value reflects the cost if purchased new. Includes the $400.00 value of a fully rebuilt Tippmann X7 Phenom Valve with a Full-Auto lower assembly, which is no longer available new and is now discontinued.

Not Included

• Original Packaging
• Ammo / Paintballs
• CO2 / HPA Tank

About the Marker

Functionality

• Fully rebuilt, fully functional & tested (See Testing Video)
• Marker has never been fielded since being rebuilt
• Full-Auto T20 Hall-Effect electronic board has been rebuilt and is fully functional
• Full-Auto mode activates when the selector is switched to the Full-Auto position with a battery installed
• Marker functions in Semi-Auto without a battery installed
• Full-Auto mode features a built-in 3-shot safety. This is normal operation for Tippmann Full-Auto systems.
• T20 electronic board is programmable with multiple firing modes

Parts & Accessories

• Rebuilt and tested by Custom Paintball Markers
• Custom Paintball Markers 3D Printed ASA/Carbon Fiber Magwell
• If the front sight is removed, the top Picatinny rail shows a small visible gap at the handguard interface

Item Appearance

• Refurbished–Used condition
• Minor cosmetic wear from testing & storage

3D Printed Part Notes

• ASA / Carbon Fiber magwell printed at 75% gyroid infill
• ASA / Carbon Fiber mag latch and grip adapter printed at 75% gyroid infill
• ASA / Carbon Fiber tank stock
• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break. Be mindful about leaving the marker in direct sunlight.
• Over-tightening screws can create cracks—handle with care.
• 3D printed parts will hold up during regular play if respected. User error is not valid for refunds.
• Replacement parts may be purchased but will not be replaced for free.

Air & Chronograph

• Tested using paintballs at 280 FPS using HPA
• Optimized for CO2
• Chronograph adjustment required after reassembly to meet field FPS limits
• Tested at operational velocity using reball; paint typically shoots slightly higher FPS
• * For proper operation with HPA, a regulator output of 800–1100 PSI is strongly recommended for Tippmann markers and markers utilizing Tippmann internals (Avoid Low Output of 450 PSI and less)

Paint Preference

• This marker is hard on paint and not recommended for premium paint.
• Use durable mid-grade paint such as magfed paint.
• Recommended: durable 3 star or 2 star paint.
• Not functional with FSR.

Air Storage Warning

• These markers are not designed to stay aired up for long periods of time.
• * While it's fine to play for several hours, leaving a tank attached for days (such as for less-lethal or home-defense setups) can damage internal O-rings and may eventually cause leaks.
• Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

Shipping Disclaimer

• This item will be securely packaged for safe shipment.
• Marker may be disassembled for secure and cost-effective shipping.
• This helps prevent issues with USPS / UPS flagging the package due to firearm-like appearance.
• All parts are wrapped in plastic, bubble wrap, and/or paper.
• Need help putting it together? Message me—happy to help!
• USPS / UPS may inspect packages that appear to contain firearm-like items.
• Ships via USPS Priority Mail, USPS Ground Advantage, or UPS.
• Orders ship within 3 business days of payment, unless otherwise noted.
• All shipments include $100 insurance minimum.
• Weather or carrier delays may occur—please allow extra time if needed.
• For damage or loss claims, retain the box, photograph the packaging and damaged item, and contact me for USPS / UPS claims support.