Custom Paintball Markers Full-Auto Vector "Pink Betty" (HPA Not Included)

Custom Paintball Markers Full-Auto Vector "Pink Betty"
Refurbished–Used

Included

Main Body Assembly (Main Body & Internal Mechanicals):

• Custom Paintball Markers' Finish
• Custom Paintball Markers' Nameplate
• Fully-Rebuilt Tippmann X7 Phenom Valve
• CPM Upgraded T20 Trigger Pin ($10.00)
• RAP4 Tacamo Hurricane Conversion Kit ($117.00)
• HK Fixed Iron Sights ($50.00)
• Tippmann X7 Phenom Full-Auto Lower Assembly
• Rebuilt Tippmann X7 Phenom Hall Effect Electronics
• Custom Paintball Markers 3D Printed ASA/Carbon Fiber Magwell (NEW) ($60.00)
• Tippmann TiPX/TCR 7-Round Magazine ($25.00)

Front Assembly (Handguard, Barrel Kits, Foregrips, etc.):

• 5" Tippmann X7 Assault Handguard ($24.99)
• 9.75" Tippmann A5/X7 Ported Barrel
• 8.5" Custom Paintball Markers 3D Printed ASA CRB Suppressor ($40.00)

Rear Assembly (Stocks, Rear ASA, etc.):

• MCUS Phenom Flex Air Air-Thru Pipe (New Gen) ($19.95)
• MCUS Phenom/Hurricane Drop Down Stock ($49.00)
• Custom Paintball Markers 3D Printed ASA/Carbon Fiber Tank Stock (NEW) ($30.00)

Total Parts Value: $825.94

Parts value reflects the cost if purchased new. Includes the $400.00 value of a fully rebuilt Tippmann X7 Phenom Valve w/ a Full-Auto lower assembly, which is no longer available new and is now discontinued.

Not Included

• Original Packaging
• Ammo / Paintballs
• CO2 / HPA Tank

About the Marker

Functionality:

• Marker has never been fielded since being rebuilt.
• Full-Auto T20 Hall-Effect board rebuilt and fully functional.
• The Full-Auto has a 3-shot safety. This is normal for Tippmanns.
• Full-auto turns on when the safety is switched into FA.
• This marker functions in semi-auto without the need for a battery.
• T20 Electronic Board is programmable with several firing modes.

Parts & Accessories:

• The CRB suppressor, magwell, and tank stock have been 3D printed using ASA / Carbon Fiber.
• The CRB suppressor is secured to the barrel using a 3D printed barrel sleeve and a 1/2" screw.

Item Appearance:

• The pink finish may wear in high-use areas.
• The front of the CRB suppressor has minor wear with black showing through.
• The magwell is brand new but may show minor handling wear. See photos.

Paint Specifics

The following components have been painted pink using MTN 94:

• CRB suppressor
• Magwell, mag latch, and grip adapter
• Phenom lower assembly battery door, selector switch, and trigger guard
• Tank stock

3D Printed Part Notes

• ASA / Carbon Fiber magwell printed at 75% gyroid infill.
• ASA / Carbon Fiber mag latch and grip adapter printed at 75% gyroid infill.
• ASA / Carbon Fiber tank stock and CRB suppressor.
• 3D printed parts may be sensitive to heat. Do not throw, slam, or drop the marker, as these parts may crack or break. Be mindful about leaving the marker in direct sunlight.
• Over-tightening screws can create cracks—handle with care.
• 3D printed parts will hold up during regular play if respected. User error is not valid for refunds.
• Replacement parts may be purchased but will not be replaced for free.

Air & Chronograph

• Tested at 285 FPS using HPA and reballs. Optimized for CO2.
• Chronograph adjustment required after reassembly to meet field FPS limits.
• Paintballs typically shoot slightly higher FPS than reballs.
• * For proper operation with HPA, a regulator output of 800–1100 PSI is strongly recommended for Tippmann markers and markers utilizing Tippmann internals (Avoid Low Output of 450 PSI and less)

Paint Preference

• This marker is hard on paint and not recommended for premium paint.
• Use durable mid-grade paint such as magfed paint.
• Recommended: durable 3 star or 2 star paint.

Air Storage Warning

• These markers are not designed to stay aired up for long periods of time.
• While it's fine to play for several hours, leaving a tank attached for days (such as for less-lethal or home-defense setups) can damage internal O-rings and may eventually cause leaks.
• Several companies make on/off ASA adapters, which are strongly recommended for setups like this—I can provide links if requested.

Shipping Disclaimer

• This item will be securely packaged for safe shipment.
• Marker may be disassembled for secure and cost-effective shipping.
• This helps prevent issues with USPS / UPS flagging the package due to firearm-like appearance.
• All parts are wrapped in plastic, bubble wrap, and/or paper.
• Need help putting it together? Message me—happy to help!
• USPS / UPS may inspect packages that appear to contain firearm-like items.
• Ships via USPS Priority Mail, USPS Ground Advantage, or UPS.
• Orders ship within 3 business days of payment, unless otherwise noted.
• All shipments include $100 insurance minimum.
• Weather or carrier delays may occur—please allow extra time if needed.
• For damage or loss claims, retain the box, photograph the packaging and damaged item, and contact me for USPS / UPS claims support.