Tippmann Pro / Carbine Magfed Elite

Tippmann Pro / Carbine Magfed Elite
Refurbished–Used (200 FPS -Low FPS)

Included

Main Body Assembly (Main Body & Internal Mechanicals):

• Tippmann Pro / Carbine Paintball Marker
• Rebuilt Tippmann Pro / Carbine Internals
• Military Paintball 3D Printed Magfed Body Adapter ($75.00)
• BT Fixed Sight Rail ($13.95)
• GAMO Red Dot Sight ($22.90)
• Built for CO2; functional with HPA at a lower velocity

Front Assembly (Handguard, Barrel Kits, Foregrips, etc.):

• 6.75" Military Paintball 3D Printed Handguard
• 9.5" Tippmann A5/X7 Ported Barrel
• Tippmann X7 SCAR Modified Front Sight ($25.00)

Total Parts Value: $336.85
(Parts value reflects cost if purchased new. Includes the $200.00 value of a new Tippmann Pro / Carbine marker.)

Not Included:

• TipX Magazine
• CO2/HPA
• Paintballs

About the Marker

Functionality:

• The marker has been fully rebuilt.
• 200 FPS using CO2.
• The marker is currently shooting at low velocity, and I do not know why. It is discounted to account for the low FPS.

Parts & Accessories:

• The handguard is easy to remove. It slides slightly over the body and is held in place by the front sight; it is not otherwise attached to the main body.
• The front of the 3D printed magfed body kit was modified because it was cracking. I filed the area down with a Dremel to help prevent further cracking. This modification is not visible unless looking at the front of the top rail.
• The body kit has minor cracks near the screws that hold it in place.
• The front sight helps hold the handguard in place and may move during use. Be sure to secure it. If you remove the front sight, you may need to put something else in its place to hold the handguard.

3D Printed Part Notes:

• The magfed adapter and handguard were designed and manufactured by Military Paintball .SK in Slovakia.
• 3D printed parts may be sensitive to heat. Avoid dropping or slamming the marker, and avoid over-tightening screws, as these may damage the parts.
• These parts will hold up during normal play when handled with reasonable care. Damage caused by user handling is not covered.
• If damaged, replacement parts may be purchased at the standard cost. They will not be replaced free of charge.

Air & Chronograph

• Tested at 200 FPS using CO2 nd 160 FPS using HPA at 1.15K PSI output
• Built for CO2; functional with HPA at a lower velocity.
• Tested at operational velocity using reball; paint typically shoots slightly higher FPS.
• * For proper operation with HPA, a regulator output of 800–1100 PSI is strongly recommended for Tippmann markers and markers utilizing Tippmann internals (Avoid Low Output of 450 PSI and less).

Paint Preference

• This marker is hard on paint and may break premium or brittle paint.
• For best results, use Valken Graffiti or durable 2-Star / 3-Star paint with a thicker shell.
• Paint breaks may occur depending on paint quality and weather conditions.
• In hot weather, paintballs can swell; in cold weather, they can become brittle.
• Always store paint in the shade while playing to reduce changes in paint quality from sun exposure.

Air Storage Warning

• These markers are not designed to stay aired up for long periods of time.
• While it's fine to play for several hours, leaving a tank connected at home for days (such as for less-lethal or home defense purposes) can damage internal O-rings and may eventually lead to leaks.
• Several companies make on/off ASA adapters, which are strongly recommended for setups like this. I can provide recommendations upon request.

Shipping Disclaimer

• This item will be securely packaged for safe shipment.
• The marker may be disassembled for secure and cost-effective shipping.
• This helps prevent issues with USPS / UPS flagging the package due to its firearm-like appearance.
• All parts are wrapped in plastic, bubble wrap, and/or paper.
• Need help putting it together? Message me—happy to help!
• USPS / UPS may inspect packages that appear to contain firearm-like items.
• Ships via USPS Priority Mail, USPS Ground Advantage, or UPS.
• Orders ship within 3 business days of payment, unless otherwise noted.
• All shipments include a $100 insurance minimum.
• Weather or carrier delays may occur—please allow extra time if needed.
• For damage or loss claims, retain the box, photograph the packaging and damaged item, and contact me for USPS / UPS claims support.